|
|
<< Systems Soldier >> |
|
|
|
|
|
|
| Code |
GK-251 |
| Bar Tie
Connector |
| The bar tie
connector allows the 15 mm Bar Tie to be used as a brace and
tensioner between Soldiers. For use of Falsework, truss and similar
application. |
| Weight |
1.0kg |
|
| Code |
GK-252 |
| Six
Way Connector |
| Developed
for use in ranking shore applications, Strut Adaptors connect
between the webs of the Super Slim Soldiers (Vertical member) using two
Connecting Pins & Clips. The Jack end is secured to the Strut Adaptor
using a Pivot Pin. |
| Weight |
25.0kg |
|
|
|
|
|
|
|
|
|
| Code |
GK-253 |
| Foot
Jack Adopter |
| Especially
designed foot plate used in conjunction with jacks. The foot jack adopter
is a load distributing base which enable variable compensation
for uneven ground level. Used together with a jack spanner, The Foot
jack adopter can also manually adjust the height of vertical shore in such
applications where the rotation of the solder is not possible, Horizontal
shores require on each |
| Weight |
5.7 Kg. |
|
| Code |
GK-254-55 |
| Strut
Adopter |
| Developed
for used in shoring applications, These heavy duty jacks convert the super
slim soldier to vertical or ranking shore. Rotating the vertical soldier
in in either direction extended or contracts the overall length of
the shore. One of each hands required per assembly. |
| Type/Color |
LH Green, RH Orange |
| Weight |
12.8 Kg., 12.8 Kg |
|
|
|
|
|
|
|
|
|
| Code |
GK-256 |
| Strut
Adopter |
| Developed for use in raking shore applications,
Strut adopter connect between the webs of the super slim soldier vertical member) using two connecting Pins & Clips. The Jack end is ensured
to the strut adopter using a Pivot Pin. |
| Weight |
4.0 kg |
|
| Code |
GK-257 |
| Base
Jack |
| A heavy duty, load distributing base featuring a pivot joint at the base plate
enable variable compensation for uneven ground levels. Used in vertical, Horizontal
and raking shore application |
| Weight |
39.0 kg |
|
|
|
|
|
|
|
|
|
| Code |
GK-258 |
| Head
Jack |
| Designed Specially for high capacity shoring, this heavy duty head jack provides locking screws for securing steel beams. Fine adjustment is achieved by rotating the intermediate section thus eliminating the need using tools. |
| Weight |
36.0 kg |
|
| Code |
GK-259 |
| Pyramid
Head Piece |
| Designed
for supporting slabs, beams etc. when a single base jack is used. The
design enables the unit to be rotated. |
| Weight |
27.2 kg |
|
|
|
|
|
|
|
|
| Code |
GK-260 |
| Flat
Head |
| Performing the same duties as the Trishore Flat Head and developed for supporting concrete slabs,
horizontal concrete beams etc. The design provides positive slab support between opposing surfaces. |
| Weight |
26.0 kg |
|
|
|
|
|
|
|
|
|
|
